How to Build a Custom Skateboard, Part 1

How to build a custom longboard Part 1

How to Build a Custom Skateboard Part 2

Building a custom longboard Part 2

How To Make A Custom Skateboard Using The Thin Air Press (Quick Version)

10 steps to making a custom skateboard. Click to play!

How Much Glue

Applying the right amount of glue is super-important to making a good skateboard

Bamboo Drop Deck

The focus of this tutorial is to elaborate on parts of the process that are specific to building a drop deck that includes bamboo.

Skateboard Stencil Art

This tutorial covers one of the easiest and most effective methods for creating art on skateboards.

How to Build a Bamboo Longboard

Bamboo = Flex... and not just flex, but a crazy amount of 'springback' which gives it a unique feel while riding. The ability to mix and match maple, bamboo and even birch (the lightest of the three) veneer in a deck's construction is going to open up the possibilities for our building community.

How To Make A Paper Template For A Custom Skateboard

This video from the Roarockit Skateboard Company demonstrates how to make your own paper template to be used when designing a custom skateboard.

How To Shape A Foam Mold For A Custom Skateboard

This video from the Roarockit Skateboard Company demonstrates how to shape your own foam mold to be used when designing a custom skateboard.

Layout, Cut and Finish a Skateboard

In this tutorial we will show you the steps to completing your custom made skateboard deck after it has dried for at least 8 hours in the Thin Air Press vacuum bag.

Drop Through Truck Holes

If you are not familiar, Drop through trucks will allow your baseplate to be mounted to the top side of your board, which brings the standing platform on your deck closer to the ground. Similar to a Drop Deck, being closer to the ground will help provide stability and make it easier to push.

55" Dancer Longboard

Many times over the years we have been asked how to make a longboard that is longer than the 48" veneers we sell at Roarockit. This tutorial on making a 55" Dancer shows how to edge-join veneer to make a board as long as you like.

4 Creative Longboard Graphics

This first deck in the series is a very unique double drop deck (1" drop deck with drop through truck mounting) that we created to show off four unique graphic applications.

How to Cut Grip Tape Art

This tutorial is an extension of our 55" Longboard Dancer tutorial where we demonstrated the process involved with laminating a board longer than the standard 48" long skateboard veneers. In that tutorial you may have noticed that the top side of the deck had a unique grip tape pattern... well, this is how we did it!

Gluing Crossband

Edge-joining broken or too-small pieces or sheets of 1/16" maple

How To Fix A Warped Board

if you find yourself with a warped deck, we've got a relatively easy DIY solution to try and fix it.

Cutting 1/16" Veneers

Video shows how to cut 1/16" veneers for building longboards.

Two Inch Drop Deck

Many people ask if it is possible to make a drop board using our Thin Air Press. This tutorial goes through the process involved to making this type of deck.

One Inch Drop Deck Build

This tutorial shows how to build a 1″ drop deck in one glue-up. The great thing about this deck is it can be built in less than 3 hours (not including the glue drying time).

How to Apply Carbon Fiber

This tutorial goes through in detail, the steps to laminate carbon fiber onto the top and bottom of a skateboard deck.

Categories

SEARCH

Recent Posts

About Us

Assistance

RR World

Contact Us

Media